HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
10-137
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 7.1.1 Eliminator Assy Exit (PL7.1.1) continued
Removal
1. Remove the
Cover Assy Front
(RRP 1.1.8).
2. Remove the
Cover Front L/H
(RRP 1.1.10).
3. Remove the
Cover Assy Rear
(RRP 1.2.3).
4. Remove the
Cover Assy Top
(RRP 1.1.4).
In the following steps, take care not to damage the
Actuator Full Stack
(PL7.1.2).
5. Raising upward the left end of
Eliminator Assy Exit
from the left mounting position of the
Chute Assy Exit
, remove it from the printer.
6. Draw the right end of
Eliminator Assy Exit
from the right mounting position of the
Chute
Assy Exit
.
Replacement
In the following steps, take care not to damage the
Actuator Full Stack
(PL7.1.3).
1. Insert the right end of
Eliminator Assy Exit
into the right mounting position of the
Chute
Assy Exit
from the printer.
2. Insert the left end of
Eliminator Assy Exit
into the left mounting position of the
Chute
Assy Exit
.
3. Mount the
Cover Assy Top
(RRP 1.1.4).
4. Mount the
Cover Assy Rear
(RRP 1.2.3).
5. Mount the
Cover Front L/H
(RRP 1.1.10).
6. Mount the
Cover Assy Front
(RRP 1.1.8).
Summary of Contents for b 6100
