HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
10-143
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 7.1.3 Bearing Exit (PL7.1.6) ,Bearing MID (PL7.1.25) and Roll Assy
MID-1(PL7.1.7) continued
Replacement
1. Insert the
Bearing MID
into the left and right shafts of lower
Roll Assy MID-1
.
2. Mount the lower
Roll Assy MID-1
together with the left and right
Bearing MIDs
on the
Roll
Assy MID-1
to the
Chute Assy Exit
.
3. Secure the left and right shafts of lower
Roll Assy MID-1
to the
Chute Assy Exit
with the
hook of
Bearing MID
.
4. Insert the
Gear Exit-17
(PL7.1.5) into the shaft of lower
Roll Assy MID-1
from the
Chute
Assy Exit
.
5. Hook the
Gear Exit-17
to the shaft of lower
Roll Assy MID-1
.
6. Insert the
Bearing Exit
into the left and right shafts of upper
Roll Assy MID-1
.
7. Mount the upper
Roll Assy MID-1
together with the left and right
Bearing Exits
on the
Roll
Assy MID-1
to the
Chute Assy Exit
.
8. Secure the left and right shafts of upper
Roll Assy MID-1
to the
Chute Assy Exit
with the
hook of
Bearing Exit
.
9. Aligning the position exactly, insert the
Gear Exit-32
(PL7.1.23) into the
Chute Assy Exit
.
10. Insert the
Gear Exit-17
into the shaft of
Roll Assy MID-2
(PL7.1.11) from the
Chute Assy
Exit
.
11. Hook the
Gear Exit-17
to the shaft of
Roll Assy MID-2
.
12. Insert the
Gear Exit-17
into the shaft of upper
Roll Assy MID-1
from the
Chute Assy Exit
.
13. Hook the
Gear Exit-17
to the shaft of upper
Roll Assy MID-1
.
14. Mount the
Chute Assy Exit
(RRP 7.1.8).
15. Mount the
Eliminator Assy Exit
(RRP 7.1.1).
16. Mount the
Cover Interlock
(RRP 9.1.18).
17. Mount the
Plate Assy left
(RRP 9.1.1).
18. Mount the
Cover Assy Top
(RRP 1.1.4).
19. Mount the
Cover Left
(RRP 1.1.1).
20. Mount the
Cover Assy I/F
(RRP 1.1.2).
21. Mount the
Cover Assy Rear
(RRP 1.2.3).
22. Mount the
Cover Front L/H
(RRP 1.1.10).
23. Mount the
Cover Assy Front
(RRP 1.1.8).
Summary of Contents for b 6100
