HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
10-165
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 8.1.4 Motor Assy Main (PL8.1.14) continued
Removal
1. Remove the
Cover Assy I/F
(RRP 1.1.2).
2. Remove the
Cover Left
(RRP 1.1.1).
3. Remove the
Plate Assy Left
(RRP 9.1.1).
4. Unplug the connector (P/J29) from the
PWBA HKB26 MCU
(PL10.1.13).
In the following steps, take care not to drop and damage the
Motor Assy Main
.
5. Remove the four screws securing the
Motor Assy Main
to the printer.
6. Remove the
Motor Assy Main
from the printer.
Replacement
In the following steps, take care not to drop and damage the
Motor Assy Main
.
1. Align the
Motor Assy Main
with it mount position to the printer.
2. Secure the
Motor Assy Main
to the printer with four screws.
3. Plug the connector (P/J29) in the
PWBA HKB26 MCU
(PL10.1.13).
4. Mount the
Plate Assy Left
(RRP 9.1.1).
5. Mount the
Cover Left
(RRP 1.1.1).
6. Mount the
Cover Assy I/F
(RRP 1.1.2).
Summary of Contents for b 6100
