HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
10-187
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 10.1.3 Switch Assy I/L Rear (PL10.1.7) continued
Removal
1. Remove the
Cover Assy Front
(RRP 1.1.8).
2. Remove the
Cover Front L/H
(RRP 1.1.10).
3. Remove the
Cover Assy Rear
(RRP 1.2.3).
4. Remove the
Cover Assy I/F
(RRP 1.1.2).
5. Remove the
Cover Left
(RRP 1.1.1).
6. Remove the
Cover Assy Top
(RRP 1.1.4).
7. Remove the
Plate Assy Left
(RRP 9.1.1).
8. Remove the
Cover Interlock
(RRP 9.1.18).
9. Remove the
Chute Assy Exit
(RRP 7.1.8).
10. Unplug the connector (P/J30) from the
PWBA HKB26 MCU
(PL10.1.13).
11. Unclamp the harness of
Switch Assy I/L Rear
from the printer.
In the following steps, do not detach the
Switch Assy I/L Rear
and the printer far
away because they are connected with the harness.
12. Remove the two screws securing the
Switch Assy I/L Rear
to the printer.
13. Detach the harness of
Harness Assy OCT-M
a little from the printer.
14. Draw the harness of
Harness Assy OCT-M
from the hole in the printer.
Replacement
1. Insert the harness of
Switch Assy I/L Rear
into the hole in the printer.
2. Align the
Switch Assy I/L Rear
with its mount position to the printer.
3. Secure the
Switch Assy I/L Rear
to the printer with two screws.
4. Plug the connector (P/J30) to the
PWBA HKB26 MCU
(PL10.1.13).
5. Clamp the harness of
Switch Assy I/L Rear
to the printer.
6. Mount the
Chute Assy Exit
(RRP 7.1.8).
7. Mount the
Cover Interlock
(RRP 9.1.18).
8. Mount the
Plate Assy Left
(RRP 9.1.1).
9. Mount the
Cover Assy Top
(RRP 1.1.4).
10. Mount the
Cover Left
(RRP 1.1.1).
11. Mount the
Cover Assy I/F
(RRP 1.1.2).
12. Mount the
Cover Assy Rear
(RRP 1.2.3).
13. Mount the
Cover Front L/H
(RRP 1.1.10).
14. Mount the
Cover Assy Front
(RRP 1.1.8).
Summary of Contents for b 6100
