3-14
HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
Version 1.0
Primary FIPs:Error Codes
3.6 E5:CLOSE TOP / REAR COVER
An Interlock Switch is not actuated.
Step
Actions and Questions
Yes
No
1
INITIAL ANALYSIS
Inspect the following components.
•
PWBA HKB26 MCU
(PLPL10.1.13)
•
PWBA LVPS
(PL10.1.17)
•
Switch Assy I/L Rear
(PL10.1.7)
•
Cover Rear
(PL1.2.5)
Are they compatible with your printer version, correctly
installed, not damaged, deformed, or contaminated?
Go to step 2.
Replace the
problem com-
ponents.
2
SWITCH ASSY I/L REAR
(PL10.1.7) ANALYSIS
1. Check the
Switch Assy I/L Rear
using SENSOR/SWITCH
CHECK.
2. Open and close the
Cover Rear
(PL1.2.5).
Does the
Switch Assy I/L Rear
function correctly and
increment the Sensor Check number on the screen each
time you actuate it?
Go to step 3.
Replace the
Switch Assy I/
L Rear
(RRP10.1.5).
3
SWITCH ASSY I/L REAR
(PL10.1.7) ANALYSIS
Check the voltage between P/J30-2 and P/J30-1.
Is there +24VDC between P/J30-2 and P/J30-1 with the
Cover Rear
(PL1.2.5) closed?
Replace the
Cover Rear
(PL1.2.5).
Replace the
PWBA HKB26
MCU
(RRP10.1.7).
Summary of Contents for b 6100
