HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
10-203
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 10.1.9 PWBA HKB PS (PL10.1.17) continued
Removal
1. Remove the
Cover Assy Front
(RRP 1.1.8).
2. Remove the
Cover Front L/H
(RRP 1.1.10).
3. Remove the
Cover Assy I/F
(RRP 1.1.2).
4. Remove the
Cover Left
(RRP 1.1.1).
5. Remove the
Cover Assy Top
(RRP 1.1.4).
6. Remove the
Plate Assy Left
(RRP 9.1.1).
7. Remove the
Plate Handle
(RRP 9.1.3).
8. Unplug the connector (P/J11) from the
PWBA HKB PS
.
9. Unplug the connector (P/J285) from the
PWBA HKB PS
.
10. Unplug the connector (P/J283) from the
PWBA HKB PS
.
11. Unplug the connector (P/J281) from the
PWBA HKB PS
.
12. Unplug the connector (P/J284) from the
PWBA HKB PS
.
13. Unplug the connector (P/J281) from the
PWBA HKB PS
.
14. Remove the four screws securing the
PWBA HKB PS
to the printer.
In the following steps, do not detach
Main Switch
(PL10.1.18) and
PWBA HKB PS
far
away because they are connected with the harness.
15. Detach the
PWBA HKB PS
a little from the printer.
16. Connect the connector (P/J) of
PWBA HKB PS
to the
Main Switch
(PL10.1.8) on the printer.
Summary of Contents for b 6100
