3-26
HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
Version 1.0
Primary FIPs:Error Codes
3.11 E2-0:EARLY FEED JAM continued
Step
Actions and Questions
Yes
No
4
ACTUATOR CST
(PL21.1.19) ANALYSIS
Remove the
Cassette Assy
(PL2.1.1). Inspect the combination
of the
Actuator CST
.
Does the combination of the
Actuator CST
show the cor-
rect combination for the paper size present in the cas-
sette?
Go to step 5.
Replace the
loaded paper
to the proper
one.
5
ACTUATOR REGI
(PL5.1.10) ANALYSIS
Does the
Actuator Regi
expose the sensing point of the
Sensor Photo:Regi
(PL5.1.12) when a sheet of paper
strikes the actuator, and does the
Actuator Regi
block the
sensing point of the
Sensor Photo:Regi
when there is no
paper striking the actuator?
Go to step 6.
Replace the
Actuator Regi
(RRP5.1.3).
6
SENSOR PHOTO:REGI
(PL5.1.12) ANALYSIS
Use SENSOR/SWITCH CHECK to check the
Sensor Photo
Regi
.
Does the
Sensor Photo:Regi
function correctly and incre-
ment the Sensor Check number on the screen each time
you actuate it?
Replace the
PWBA HKB26
MCU
(RRP10.1.7).
Go to 7.7
Sensor
Photo:Regi
Failure.
Summary of Contents for b 6100
