13-74
HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
Version 1.0
Principles of Operation
Fuser Temperature Cycling
Fuser temperature does not remain at a single, constant temperature. Fuser temperature follows a sine
wave through a range of temperatures. FUSER TEMPERATURE CHECK (software diagnosis) displays
the contents of NVRAM (FUSER TEMP.SET).
Temperature name
Temperature value
High Trouble Temperature
Approximately 215
o
C (Standby tempe approximately 35
o
C)
Fuser Off Temperature
Fuser control tempe/- 0
o
C
Fuser control temperature
Standby temperature (180
o
C)
Running temperature (180
o
C)
Fuser On Temperature
Fuser control temperature - 2
o
C
Low Trouble Temperature
Approximately 155
o
C (Standby temperature - approximately 25
o
C)
Summary of Contents for b 6100
