3-30
HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
Version 1.0
Primary FIPs:Error Codes
3.13 C5:ADD PAPER TO TRAY 1/2/3
Tray 1 is out of paper.
Step
Actions and Questions
Yes
No
1
Inspect the following components.
•
Actuator N/P
(PL3.1.6)
• Sensor Photo:No Pap1 on the
PWBA Feeder
(PL3.1.36)
•
PWBA HKB26 MCU
(PL10.1.13)
Are they compatible with your printer version, correctly
installed, not damaged, deformed, or contaminated?
Go to step 2.
Replace the
problem com-
ponents.
2
Load paper in the Tray 1.
Does the C5 still appear?
Go to step 3.
Problem is
solved.
3
SENSOR PHOTO:NO PAP1 on the
PWBA FEEDER
(PL3.1.36) ANALISIS
Check the function of the Sensor Photo:No Pap1 using SEN-
SOR/SWITCH CHECK.
Does the
Sensor Photo:No Pap 1
function correctly and
increment the Sensor Check number on the screen each
time you actuate it?
Replace the
PWBA HKB26
MCU
(RRP10.1.7).
Replace the
PWBA Feeder
(RRP3.1.7).
Summary of Contents for b 6100
