15-4
HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
Version 1.0
Printer Specifications
Safety Standards
HAKUBA satisfies the following safety standards:
EMI
100VAC printer:
VCCI information Processing Equipment
120VAC printer:
FCC part 15 Subpart B, Class B (ANSI C63.4/11.4D)
200/220VAC printer:
EN55022 (CISPR Publication 22), Class B
Category
Standard Satisfied
Laser Safety
100V/120V type is submitted to FDA 21 CFR (Chapter 1, Subchapter
J, Section 1010/1040).
220V/240V type is submitted to IEC 825 Class 1 laser Product.
Ozone Density
Does not exceed 0.01ppm of ozone density TWA (Time Weight Aver-
age), measured accordance with the BAM standerd.
Other standards
100V/120V type satisfies;-
UL 1950 3rd Edition, CSA C22.2 no. 950-M95 or equivalent, NOM
200V/220V satisfies;-
IEC 950 including amendments 1,2,3 and 4, CE Directive
1
, Nordic and
other Agency Approval
2
, CCIB
Note: 1. When the controller is installed, the OEM customer shall be
responsible for the submittal of CE and CCIB.
2.Tthe OEM customer shall be responsible for the Nordic agency
approvals including NEMKO, SEMKO, SETI and DEMKO.
Summary of Contents for b 6100
