HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
15-5
Version 1.0
Printer Specifications
First Print Output Time (FPOT)
The First Print Output Time is the time from when the printer receives a START signal in the READY state,
until a single page is printed and delivered into the output tray, under the scanning condition (ROS Motor
ON).
Duplex Upper Value:1 sht.Batch Mode
Duplex Lower Value:2 sht.Batch Mode
Note:
1.The data are the theoretical values when the paper is fed from tray 1.
2. When ROS Motor OFF, the values are adjusted as follows:
FPOT= t + 4.0 (600 dpi)
FPOT = t+ 4.0 (1200 dpi)
3. When the paper is fed from other tray, the values are adjusted as follows:
FPOT = t - 1.2 (from MBF)
FPOT = t + 1.2 (from tray 2)
FPOT = t + 2.4 (from tray 3)
4. The values for FPOT from the Sleep Mode are to be added 65 to each value.
Continuous Printing Speed After The First Sheet Out
Paper Size
Simplex Mode t (sec)
Duplex Mode t (sec)
Letter SEF
7.5
13.8
14.6
A4 SEF
7.6
14.0
15.4
Paper Type
Simplex Mode
(prints per minute)
Duplex Mode
(impressions per minute)
Letter SEF
26.2
19.2
Legal 13” SEF
21.5
16.3
Legal 14” SEF
21.5
15.9
Executive SEF
TBD
14
A4 SEF
24.9
18.1
B5 (JIS) SEF
26.2
19.8
Summary of Contents for b 6100
