3-32
HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
Version 1.0
Primary FIPs:Error Codes
3.15 C3:TRAY 1/2/3 OUT INSTALL TRAY
The Tray 1 is not installed or installed not in the position.
Step
Actions and Questions
Yes
No
1
Inspect the following components.
•
Cassette Assy
(PL2.1.2)
•
Motor Assy
(PL2.2.22)
•
Connector
(PL2.2.25)
•
Harness Assy N/MOT
(PL3.1.39)
•
PWBA Feeder
(PL3.1.36)
•
PWBA Size 1
(PL9.1.19)
•
PWBA HKB26 MCU
(PL10.1.13)
Are they compatible with your printer version, correctly
installed, not damaged, deformed, or contaminated?
Go to step 2.
Replace the
problem com-
ponents.
2
Reinstall the Cassette Assy correctly.
Does the error C5 still displayed?
Go to step 3.
Problem is
solved.
3
HARNESS ASSY N/MOT
(PL3.1.39) ANALYSIS
1. Disconnect the Harness Assy N/MOT.
2. Check the continuity between J67-5 <=> J671-1, J67-3 <=>
J671-4, and J67-1 <=> J671-7.
Is there the continuity between J67-5 <=> J671-1, J67-3
<=> J671-4, and J67-1 <=> J671-7?
Replace the
PWBA HKB26
MCU
(RRP10.1.7).
Replace the
Harness Assy
N/MOT
(PL3.1.39).
Summary of Contents for b 6100
