HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
3-37
Version 1.0
Primary FIPs:Error Codes
3.20 FUSER UNIT NEED TO REPLACE PLEASE WAIT
The Fuser Assy is nearing end of life and better to be replaced soon.
Step
Actions and Questions
Yes
No
1
Inspect the following components.
•
Fuser Assy
(PL6.1.7)
•
PWBA HKB26 MCU
(PL10.1.13)
Are they compatible with your printer version, correctly
installed, not damaged, deformed, or contaminated?
Go to step 2.
Replace the
problem com-
ponent.
2
Replace the
Fuser Assy
with new one.
Does the message still appear?
Go to step 3.
Problem is
solved.
3
Turns the Main Power OFF and ON.
Does the message still appear?
Replace the
PWBA HKB26
MCU
(RRP10.1.7)
Problem is
solved.
Summary of Contents for b 6100
