8-12
HAKUBA 26PPM Laser Printer - Base Engine Technical Manual
Version 1.0
Diagnostic Mode
1.5.7 Alignment
The Alignment Menu enables you to adjust the registration of the image to the paper. The image can
be adjusted from top to bottom (direction of paper travel) and from side to side (scan direction). You
can adjust each paper source separately.
Complete instructions for performing registration alignment are contained in section 9.
Table 3. Alignment Menu
Test
Component Adjusted
Notes
Tray1 Feed Dir
Tray 1 in the feed direction
Adjusts the timing between the stock
being fed from tray one and the image
on the photoreceptor.
Tray2 Feed Dir
Tray 2 in the feed direction
Adjusts the timing between the stock
being fed from tray two and the image
on the photoreceptor.
Tray3 Feed Dir
Tray 3 in the feed direction
Adjusts the timing between the stock
being fed from tray three and the
image on the photoreceptor.
Front Feed Dir
MBF in the feed direction
Adjusts the timing between the stock
being fed from the multisheet bypass
feeder and the image on the photore-
ceptor.
Env Feed Dir
Envelopes in the feed direction
Adjusts the timing between the stock
being fed from the envelope feeder
and the image on the photoreceptor.
Tray1 Scan Dir
Tray 1 in the scan direction
Adjusts the image start of scan position
on the photoreceptor to match the
stock being fed from tray one.
Tray2 Scan Dir
Tray 2 in the scan direction
Adjusts the image start of scan position
on the photoreceptor to match the
stock being fed from tray two.
Tray3 Scan Dir
Tray 3 in the scan direction
Adjusts the image start of scan position
on the photoreceptor to match the
stock being fed from tray three.
Front Scan Dir
MBF in the scan direction
Adjusts the image start of scan position
on the photoreceptor to match the
stock being fed from the multisheet
bypass feeder.
Env Scan Dir
Envelopes in the scan direction
Adjusts the image start of scan position
on the photoreceptor to match the
stock being fed from the envelope
feeder.
Summary of Contents for b 6100
