9
10
SOLID COLORS:
COLOR LOCK AND RETURN:
LIGHT SHOWS:
ColorSplash
®
VÜ Nicheless LED light fixtures are pre-programmed and synchronous with
each other while offering a wide array of lighting effects and options. They offer seven
different light shows (1-7) and five solid colors (8-12) to choose from; as well as a Color
Lock (13) and Return (14) feature which allows you to “lock” the light on a color shown
during an active light show and can return to the last locked color effect. ColorSplash
®
VÜ
Nicheless LED light fixture features are selectable by turning the existing pool light power
switch off and on, known as power cycling.
Your ColorSplash
®
VÜ Nicheless LED light fixture has seven light shows and 5 solid colors
from which you can choose. (See full description of light shows on page 13).
Your ColorSplash
®
VÜ Nicheless LED light fixture can stop a light show and “color lock” on
a color shown during an active light show and can also return to the last locked color effect.
COLOR SPLASH VÜ: LIGHT SHOWS, SOLID COLORS
AND FUNCTIONS
1. Peruvian Paradise
2. Super Nova
3. Northern Lights
4. Tidal Wave
5. Patriot Dream
6. Desert Skies
7. Nova
8. Parisian Blue
9. New Zealand Green
10. Brazilian Red
11. Arctic White
12. Miami Pink
13. Color Lock
14. Return
NOTE:
J&J’s ColorSplash
®
VÜ Nicheless LED Underwater light fixtures will not synchronize
with any other manufacturer’s pool or spa light fixtures.
NOTE:
ColorSplash
®
VÜ Nicheless LED lights are“synchronous”, meaning that multiple ColorSplash
®
VÜ, LXG, XG and Fountain lights on the same power circuit will sync together so that they all display
the same light show or solid color at the same time. All of the ColorSplash
®
VÜ, LXG, XG and Fountain
LED lights must be on the same electrical circuit for this feature to be operational. ColorSplash
®
VÜ,
LXG, XG and Fountain LED lights may not synchronize with other pool, spa or fountain light fixtures.
Please consult a qualified electrician to determine your specific pool and spa circuit configuration.
During off/on power cycling, prior to the selected show/color displaying, no illumination
will occur. This is normal during the cycling process. During this period the pool/
spa will be dark and precautions should be taken to avoid any unforeseen accidents.
Failure to observe this warning may result in serious injury or death to pool/spa users.
WARNING
CHANGE LIGHT SHOW
ColorSplash
®
VÜ light shows: Power cycle pool light switch off/on as many times needed to match the
desired light show’s specified number. Example: If you are on (10) Brazilian Red and want to display
(3) Northern Lights light show, power cycle three (3) times to select and activate Northern Lights.
COLOR SPLASH VÜ LIGHTING OPERATION: HOW TO CHANGE
LIGHT SHOW, SELECT SOLID COLORS AND FUNCTIONS
SELECT SOLID COLORS
Similar to selecting an ColorSplash
®
VÜ light show, power cycle pool light switch off/on as
many times needed to match the desired solid color’s specified number. Example: If you are
on (6) Desert Skies and want to display (11) PureWhite, power cycle eleven (11) times
to select and display PureWhite (RGB-W) or Arctic White (RGB).
NOTE:
During power cycle process, before the selected light show or color is displayed,
temporarily their will be no illumination. This is normal during the switching process.
NOTE:
To control your ColorSplash
®
VÜ Nicheless LED Lights using J&J's ColorSplash
®
XG Controller, please refer to the operation guide included with the XG Controller.
Show:
Slow color-fades between white, magenta, blue and green.
Cycle:
Continuous color slow-fades between colors. Light will stay on each solid color for
4 seconds before fading to the next.
Show:
Very rapid flashing through random colors.
Cycle:
Continuous color flashing.
1. PERUVIAN PARADISE (FACTORY DEFAULT LIGHT SHOW):
2. SUPER NOVA:
Show:
Slow cross-fade through all colors.
Cycle:
Continuous color sequence cycle with slow cross-fade between colors. Light will
hold on each color for 8 seconds before cross-fading to the next.
3. NORTHERN LIGHTS:
DESCRIPTION OF LIGHT SHOWS AND COLORS
Show:
Slow cross-fade between green and blue.
Cycle:
Continuous color sequence cycle with slow cross-fade between green and blue
colors. Light will hold on solid green and blue for 8 seconds before slowly transitioning.
Show:
Cross-fade through red, white and blue.
Cycle:
Light will hold on each color for 3 seconds before changing to the next.
4. TIDAL WAVE:
5. PATRIOT DREAM:
Summary of Contents for J&J Electronics ColorSplash VU LPL-R1C-12...
Page 16: ...29 30 NOTES NOTA NOTES NOTA...
