MFB
on the headset once to answer the call. Press
MFB
again will hang-up and terminate the
call.
Making a call (voice dialing)
(1) Press the headset
MFB
to activate the voice dialing.
(2) A beep will be heard then prompt the user to say the name of the person to call.
(3) Say the name after beep.
(4) The phone will place the call automatically. In case the phone does not recognize the name
spoken, the steps above may be repeated.
(5) Press the
MFB
again to terminate the call
(6) If the desired number to be dialed has no voice tag, normal dialing also can be done by using
the keypad on the Bluetooth enabled phone. When connected, press the
MFB
again will
hang-up and terminate the call.
Charging
Plug the USB cable into the 8-pin jack on the bottom of the Headset, and plug the other end into
the USB port of Notebook/PC for power. In charging condition, the Indicator B (red LED) of the
Headset will be on. It takes about 2 hours to charge the Headset. The Indicator B (red LED) will
disappear after charging is complete.
Last Call Redial
Press the volume down (-) key on the headset over 2 seconds and release after a ring tone. The
redial will be in process.
Hold Function
Long press (2 sec.) the volume down (-) key to hold the call while on the line.
Mute Function
In call active, press the volume down (-) key and up (+) key coincidentally it will mute the MIC. If
press either the volume down (-) or up (+) again, it will go back to the normal condition.
Transfer Function
In call active, long press the volume up (+) key it will transfer the call to cellule phone. IF long
press the volume up (+) key again the call will go back to the headset.
ACCESSORIES:
a. Ear Hook b. USB cable with 8-pin plug c. AC Adaptor with USB port (optional)
3
