16
Folding for Storage and Transport
Fig 19
Fig 20
Fig 21
1. Remove children and all cargo from inside the passenger compartment.
2. Unclip the tow bar safety strap from the “D” ring, and remove pin to remove hitch from frame.
3. Clip the end of the strap back on to the tow bar “D” ring.
4. Remove the flag and pole and separate the sections.
5. Remove the quick-release pins form the stub axles of the rear wheels.
6. Remove the quick-release pin from the tow bar bracket at the front corner of the trailer.
7. Fold the tow bar back under the trailer, and replace the quick-release pin through the tow bar and U-channel
8. Place wheels and flag inside the passenger compartment, and close the front cover.
9 .Fold upper cabin as shown above:
a. Remove 4-season Rain cover
b. Press red button on QR connector and pull apart - from both sides.
b. Fold frame down as shown.
c. Fold in until trailer is flat
Maintenance
Before each ride, check the trailer for signs of wear or damage. Inflate tires to correct pressure as
stated on tire sidewall, and check for wear and tear before each ride. Use of hand pump
recommended to avoid overinflation. Check nuts and bolts for tightness, and make sure QR pins for
wheels, frame and hitch are secured. Once a year, it is recommended to have the trailer inspected by a
qualified bicycle mechanic.The trailer fabric can be cleaned with mild soap and water, and allowed to
air dry. The fabric is not machine washable.
Warranty Service: Please return product to store or contact:
Halfords Customer Services Department,
Halfords Group plc, Washford West,
Redditch,
Worcestershire,
B98 0DE
(+44) 0345 504 53 53
customer.services@halfords.co.uk
