4-port Seamless-Switch with Multi-view
6
© Copyright 2017 Hall Research, Inc.
If the SSW-HD-4 needs to be installed in a standard 19” rack, you can use the
included rack ears.
3.4 Multi View Layouts
SSW supports three different Multiview modes. The Output modes can be
configured using Front panel, IR Remote Controller PC-GUI and RS-232. When an
input is selected in Multiview mode it is considered as a primary input and the other
inputs dynamically arrange themselves in the layout as shown below. Note that Auto
Scan can be enabled in Multiview mode.
Multi View Modes
3.5 Auto Scan (Auto Switch)
The Auto Scan feature is another important feature of the seamless switcher. When
the Auto Scan feature is enabled, the SSW automatically switches to the latest input
plugged. So even if currently selected input has video and you plug in a new input, it
will switch to the new input.
In this mode, when the selected input is unplugged, the SSW automatically switches
to another input with active video (scans from input 4 to input 1).
To enable Auto Scan, hold
Output Mode
button for 7 Seconds or until the button
light starts blinking.
