UI-IP8-DP
10
© Copyright 2018 Hall Research, Inc.
Clicking the ADD button will display a list of up to 128 commands.
UI-IP8-DP – Default command list
Click on any of the available commands listed to change the delay time or interface type.
Commands are strings that are sent to different targets or “interfaces”.
After selecting a command, you can select the desired “interface” (where it will be
sent), and the delay time prior to the next command in the macro.
UI-IP8-DP – Command Interface
The “Delay (ms)” field is the time to wait before proceeding to the next command (if any).
The interface (target) to which the commands are sent may be one of the following:
Device works like TELNET but you can select based on the Device Name.
SysCMD is the keypad itself. Like control of the LED lights or relay state.
TELNET is a specific IP address and port the command is sent.
Relay contacts (The relay contacts can also be controlled using SysCMD)
