EMCEE200
© Copyright 2021 Hall Technologies, LLC
19
Routing Audio – Input Tie or Window Tie
There are two different audio routing modes – Input Tie, or Window Tie. These can be changed to suit
the desired operation. This audio routing information is saved when a preset is created.
INPUT TIE: In this mode, the audio is fixed to a specific input. By default, this is normally input 1, but
can be switched to any of the four. In this mode, audio from input 1 will always be sent to the outputs,
regardless of any changes to video routing. Changes to the audio output must be made manually.
WINDOW TIE: In this mode, the audio follows the video of specific window. By default, this is normally
window A, but can be switched to any of the four. In this mode, the audio being sent to the outputs will
change automatically if the video routing to window A is changed.
From the front panel, press and hold the desired INPUT button until the LED blinks to tie the audio to
the input. Press and hold the desired WINDOW button until the LED blinks to tie the audio to the
window. To tie the audio to one of the external audio inputs, please use the OSD, Web GUI, or
RS-232/Telnet commands.
Creating and Recalling Presets
The EMCEE200 can store up to 18 different preset configurations to quickly change between layouts.
The first four are available via the front panel PRESETS buttons. The remaining presets can be saved
and recalled through the Web GUI or RS-232/Telnet commands.
From the front panel, press a PRESET button to recall that preset. Press and HOLD a PRESET button
until the LED blinks to save the current layout to that preset.
The following information is saved as part of every preset:
• Window layout mode (1 or 2)
• Window layout sizes and positions
• Window input routing
• Audio source and routing mode