background image

HOW TO USE 

PLACING ITEMS IN THE CABINET 

This appliance employs a forced circulation of cold air system.  If circulation of cold air is 

obstructed, the items will not be adequately refrigerated.  Pay attention to the following points: 

• Do not let items obstruct the cold air inlet and suction outlet.

• Place items so that they do not protrude from the shelves. The gap between the shelves and the
• door is used for circulation of cold air.

• Place items evenly on all shelves.

Please do not display goods on the bottom.  Please put goods on the shelf.

THERMOSTAT INSTRUCTION 

Operation 

Control  Panel 

The control panel is located below the doors on the front of the 

appliance. 

Turn On 

I. Turn the Power switch On.
I. Set the temperature to the desired setting (see below).

2. Close the door of the appliance.

3. Connect the appliance to a mains power supply.

Cooling Light 

Defrost Light 

CD 

Note: The Cooling Light is illuminated when the appliance is chilling the interior cabinet.

4. Turn light switch On  [I] or Off [O] as required.

Set the Operating Temperature 

I. Press the 

button. The display will flash.

2. Press the  �  or  �  buttons to display  the required temperature.

3. Press the 

button to store the temperature.

Manual  Defrost

Cooler feature an automatic defrost.  However, should the appliance require an additional
defrost period press and hold the  �  button for 6 seconds.

Automatic defrost cycles are every  6 hours and last 20 minutes (factory  defaults). 

To stop the Defrost press and hold the  �  button for 6 seconds. 

CD 

Note:  If a manual defrost is started this resets the automatic defrost timer.  During 

defrost periods the Defrost light is illuminated. 

Reviews: