21
TECHNICAL SUPPORT
Call the Identification Support Center at 800-537-1512 ext. 380 or e-mail
tagprint@htamericas.com
.
EDIT LOGGING
When ready to import data to your printer, click the Edit
Logging button. Be sure the Spirit 2100 is "Waiting to Link"
before proceeding with any file management between your
computer and the Spirit printer (see Establishing
Communications on page 16.)
To view the status of your edit logging, click the Get Edit
Log Status button. The Edit Log Status field will display Edit
Logging Enabled:
Yes/No, the number of
Edit Logs Recorded and amount of Log Memory Used.
To enable printer edit logging, press the Enable Printer
Edit Logging button. This will allow the printer to track
what information is being printed on the labels.
An "E" will appear in the softkey menu when in
Edit Log mode.
To disable printer edit logging, press the Disable
Printer Edit Logging button. The printer will no longer
track what information is printed on the labels.
To clear the Spirit's edit log, press the Clear Printer Edit
Log button.
CAUTION:
If you have not saved these files to your computer first, once removed
from the printer it cannot be restored
.
To read the edit log from the printer, press the Read
Edit Log From Printer button. The information will
appear in the Edit Log field. Commas are represented
by an underscore.
Example: This edit log would be a record of the
three following labels. Label 1: “SPIRIT 2100” on
the first line, “PRINTER” on line two, and “HELLER-
MANNTYTON” on line three. Label 2: “DATA” on
the first line, “LINE” on the second line, and “ONE”
on line three. Label 3: “DATA” on line one, “LINE”
on the second line, and a data image on line three.
To save the edit log, press the Save Read Log to File
button. The default directory on your hard drive
(unless you chose a customized directory installation)
will be
C:\ProgramFiles\HellermannTyton\Spirit_2100\data
.
It is possible to store 200 log entries. After the log becomes full, the oldest entries will be
overwritten, as needed, to make room for new entries.
The data transfer can be monitored on the status bar and on the display screen of the Spirit
2100.
