Q U I C K - S TA RT I N S T R U C T I O N S
1. Load your labels and ribbon.
(
page 3 and 4
)
2. Press the
POWER
button
.
3. Press the
FEED
button to align the labels for print.
4. Press the
MENU
button to go to the main menu.
5. Press the
LABEL
SoftKey to enter edit mode.
(
page 5
)
6. Press the
INSERT
SoftKey.
(
page 5
)
7. Press the
TEXT
SoftKey.
(
page 5
)
8. Type in your text.
(
page 5
)
9. Press the
ENTER
button or the
DONE
SoftKey to finish.
(
page 5
)
10. Press
to print one label.
(
page 8
)
Input Device:
• Alphanumeric elastomer keypad
Output Device:
• 203 d.p.i. thermal transfer printhead
Power:
• 8.4 VDC 310mA re-chargeable NiCad battery
• 120VAC/230VAC/100VAC wall mounting pack for
re-charging
Display:
• 2.0" X 1.5" viewable graphics LCD (128 X 64 pixel)
Processor:
• 8 bit RISK processor running at 6Mhz (6 million instructions
per second)
Operating Temp:
• +40F to +122F (+5C to +50C) non-condensating
• Condensation can form on any electronic device if trans-
ferred from a cold to hot or hot to cold environment quickly.
The device will not run until the condensation dissipates.
Storage Temp:
• -30C to +70C (-30F to +160F)
Communications:
• RS-232 up to 19.2K baud
Weight:
• 1.14kg (2.5lbs.)
Memory:
• 256K bytes of flash non-volatile memory
• 128K of high speed RAM
• 128K of program space
D E V I C E S P E C I F I C AT I O N S
3
