71-0149 Hallmark 46 57 SL2 Manual
Date: 12/30/2019
Rev 02
Page 8 of 11
BENCH / INTERIOR ASSEMBLY
22.
Bench Supports are pre-installed on each wall.
23.
HM 55C bench system has two benches
a.
Place the lower bench along the wall spanning from left wall to right wall.
b.
Place the upper bench along the wall spanning from left wall to right wall. The upper bench
is deeper
24.
HM 66C bench systems have three benches. (Upper Main Bench, Upper Return Bench, and Lower
Main Bench)
c.
Place the lower bench along the wall spanning from left wall to right wall.
d.
The upper main bench spans from the left wall to right wall.
e.
Secure the armrest to the wall with screws.
f.
The shorter upper return bench butts up to the main upper bench to the armrest support near
front wall. (See photos below for HM 66C layout)
g.
Install carriage bolts provided from the short bench into the primary bench and tighten the
nuts on the bolts.
HM 66C Bench Support –
Return bench has an armrest
support.
