ELECTRIC BICYCLE METER — LCD3 Product User Manual
- 25 -
○
C3
Power Assist Ratio Gear Initialization Mode
Enter C3 parameter setting interface after C2 parameter setting is finished, C3
parameter column flashes.
C3 parameter setting interface
Hold
button
(UP)
or
button
(DOWN)
for selection C3 parameter values.
The factory default is 8.
C3 parameter values
：
C3
Parameter value meaning
0
The meter is powered on and the power assist ratio is at gear 0.
1
The meter is powered on and the power assist ratio is at gear 1.
2
The meter is powered on and the power assist ratio is at gear 2.
3
The meter is powered on and the power assist ratio is at gear 3.
4
The meter is powered on and the power assist ratio is at gear 4.
5
The meter is powered on and the power assist ratio is at gear 5.
6&7
Retain
8
Each startup will automatically restore the gear shutdown last time.
After finishing C3 parameter setting, hold
button (
SW
) shortly to save the
current set values and enter C4 parameter setting interface.
○
C4
Handlebar Function Setting
Mode
Enter C4 parameter setting interface after C3 parameter setting is finished, C4
parameter column flashes.
www.HalloMotor.com
