ELECTRIC BICYCLE METER — LCD3 Product User Manual
- 28 -
current value (ie, limit current value); when setting is 9, maximum current value divided by
1.10, when setting is 8, maximum current value divided by 1.15 and so on.
After finishing C5 parameter setting, hold
button
(SW)
shortly to save the
current set values and enter C6 parameter setting interface.
○
C6 Backlight Brightness Adjustment Mode
Enter C6 parameter setting interface after C5 parameter setting is finished, C6
parameter column flashes.
C6 parameter setting interface
C6 is the meter backlight brightness adjustment mode. The default value is 3, and
setting range is 1-5, hold
button
(UP)
or
button
(DOWN)
shortly for
selection.
C6 parameter definition table
：
C6 value
Backlight brightness
1
Dimmest
2
Darker
3
Standard
4
Brighter
5
Brightest
After finishing C6 parameter setting, hold
button
(SW)
shortly to save the
current set values and enter C7 parameter setting interface.
○
C7 Cruise Function Setting Mode
Enter C7 parameter setting interface after C6 parameter setting is finished, C7
www.HalloMotor.com
