ELECTRIC BICYCLE METER — LCD3 Product User Manual
- 30 -
C8 value
Motor operating temperature
0
Function off
1
Function on
Please Note
：
The motor operating temperature display requires installing temperature
sensor in the motor, output temperature detection signal simultaneously.
After finishing C8 parameter setting, hold
button
(SW)
shortly to save the
current set values and enter C9 parameter setting interface.
○
C9 Startup Password Setting Mode
Enter C9 parameter setting interface after C8 parameter setting is finished, C9
parameter column flashes.
C9 parameter setting interface
C9 is meter power-on password setting mode. The default value is 0, hold
button
(UP)
or
button
(DOWN)
shortly for selection.
C9 parameter definition table
：
C9 value
Startup password setting
0
Function off
1
Function on
When C9 setting is 1, hold
button
(SW)
shortly, indicating that the password
function is startup, and then enter the password settings interface, three password setting
columns flash.
www.HalloMotor.com
