"A"
27.00
"A"
27.00
FIGURE 1
7'3" POST SWAY BRACE
LOCATION
FIGURE 2
PG. 1
SHELF CLIP
1.
Assemble (2) post sections by attaching
side sway braces to posts at location
shown in Fig. 1. Place sway braces
regarding H-Post length and
measurement "A".
Post Length "A"
7'3"......................28-3/8" (Uses only one set)
8'3"......................19-3/8"
10'3"....................28-3/8"
12'3"....................34-3/8"
2.
Hook shelf clips into identation at top
of posts and into first and second slots
from bottom of post. Insert shelf into
clip and repeat the same operation
on the opposite side.
USE 1/4" X 20 X 1/2"
TRUSS HEAD BOLT &
HEX NUT TO ASSEMBLE
THE SWAY BRACES.
INDIVIDUAL AND STARTING UNITS
OPEN TYPE
SIDE BRACES
TOP & BOTTOM SHELF
Summary of Contents for H-Post Shelving
Page 1: ......
