CODA-Series Coriolis mass flow meter operating manual
7
Power and Signal Connections
The USB-C connector on top of the device provides a serial interface to
CODA KM-Series mass flow meters. Meters can be powered via the USB-C,
DB-15, or M12 connector. The USB-C connector is not available on IP67-
rated devices. By default, CODA instruments have a male DB-15 connector.
✓
Note:
The DB-15 and M12 pinouts for CODA differ
from those of standard Alicat products
Pin
Male DB-15 on the device
Function
Male M12 on the device
Function
1
Not connected
0–5 Vdc output of mass flow rate
Optional: 0–10 Vdc or 4–20 mA
2
Not connected
Power in
3
0–5 Vdc output of mass flow rate
Optional: 0–10 Vdc or 4–20 mA
Serial RS-232 RxD
Optional: RS-485 A
4
0–5 Vdc output of density
Optional: 0–10 Vdc or 4–20 mA
Remote tare (ground to tare)
5
Ground (analog signals)
Serial RS-232 TxD
Optional: RS-485 B
6
Not connected
Not connected
7
Not connected
Ground (common for power and
digital communications)
8
Not connected
Ground (analog signal)
9
Power in
—
10
Ground (common for power and
digital communications)
—
11
Not connected
—
12
Remote tare (ground to tare)
—
13
Not connected
—
14
Serial RS-232 TxD
Optional: RS-485 B
—
15
Serial RS-232 RxD
Optional: RS-485 A
—
1
8
15
9
8
1
9
15
Female Connector: Device
Male Connector: Cable
2
1
8
7
6
5
4
3
