CODA-Series Coriolis mass flow meter operating manual
15
Alicat’s CODA View Interface
Alicat’s CODA View is a pre-configured LabVIEW program for digital
communications with CODA-Series devices only (other Alicat models will
not communicate through this program). It is available as a stand-alone
executable that only requires the free LabVIEW 2018 and NI-VISA 2018
runtime engines built by National instruments.
•
Download CODA View and the required runtime engine
installers for free from
alicat.com/CODAView
.
•
After opening the CODA View program, select the COM port your
device is connected to in the top left corner, and click “Connect”.
•
If connecting via the USB-C connection on the CODA
instrument, please ensure that the computer recognizes
the device’s USB port as a valid device. If it is plugged
in after the program was launched, the “Refresh” option
may need to be selected in the COM port dropdown.
•
Once the device is connected, the graph will populate immediately.
•
To log data, first choose your logging rate (1 second by default).
•
Then, click “Start log” to begin logging data. A blue
indicator will appear next to “Logging” once logging has
begun, and the auto-generated file path for the data log
will be displayed in the “Log file path” indicator.