HALO CONNECT INSTALLATION, cont'd
7. Attach Gateway to vehicle
Use the included mounting screws and a 5/16" socket to se-
curely attach the Gateway in the location selected in step 1.
It may be necessary to increase the size of the holes on the
Gateway to allow for the mounting screws to fit properly.
ON/OFF
ANTENNAS
4x
6. Connect cables to gateway
On the gateway, the side label marks the port for each of the
cables, as seen below:
8. confirm gateway power
On the Gateway, ensure that the power LED is emitting green.
Ensure the cables are securely attached to the
Gateway to avoid loosening due to vibration during vehicle
operation.
Ready Error Power
11