9
HALO CONNECT INSTALLATION, CONT'D
3. locate power source and ground
In order for the vehicle's tires to be monitored 24 hours, the
Gateway power cable should be connected to a 24 hour con-
tinous 12-20V power source and be securely grounded to the
vehicle chassis.
A mini add-a-fuse connector is included with the Gateway. If
using this add-a-fuse, locate the vehicle's fuse box and select
the power and ground locations.
If you are using a different power connection be sure to add a
fuse to the positive power cable.
The positive wire of the power cable must be
fused. An un-fused power cable may over-heat and lead to a
vehicle fire.
Use a voltmeter to test the power source and ground
with the ignition on and off to ensure that the voltage of the
chosen fuse slot is correct and continuous..
1
Fuse Rating: 1 Amp
