*
Fully charge your HALO Bolt before first use.
Jump Starting Your Vehicle with the HALO BOLT 57720
1. Plug the jumper cables into your HALO BOLT and attach
jumper cable clamps to car battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
2. Press the “Jump Start” button and wait for solid green light.
- Pulsing green light indicates safety checks in progress.
- Solid green light indicates ready to start your vehicle.
3. Start your vehicle.
4. Disconnect jumper cable clamps from car battery.
Charging Your Electronic Devices
1. Connect compatible electronic devices to the USB ports to
begin charging.
2. Press the ON/OFF power button.
Using the LED Floodlight
Press the ON/OFF LED Floodlight button.
