CONTENTS
Included Items
Operating Instructions
Maintenance and Care
Safety Precautions
Specifications
Warranty and Contact Information
WWW.BESTHALO.COM | 2
OPERATING INSTRUCTIONS
Prior to first use, it is recommended to fully charge the HALO
POWERGLOW.
Press the Power ON Button to display the power level on the
HALO POWERGLOW. The LED battery indicator will display four
solid blue lights when fully charged.
CHARGING THE HALO POWERGLOW
Using the supplied Micro-USB cable, plug the micro-USB end
of the cable into the micro-USB input port of the HALO
POWERGLOW and plug the other USB connector into a
computer or an AC adapter with a USB 5V output.
CHARGING YOUR PERSONAL
ELECTRONIC DEVICE
Using the Micro-USB cable, plug the standard end of the USB
connector into the USB output port of the HALO POWERGLOW.
You may also use your own USB cable that was supplied with
your personal electronic device. The HALO POWERGLOW will
automatically begin charging your electronic device.
TURNING ON/OFF YOUR
HALO POWERGLOW
The HALO POWERGLOW will automatically turn on and begin
charging as soon as it is plugged into your personal electronic
device. To preserve the battery, the HALO POWERGLOW will
automatically turn off if the electronic device is fully charged
and no longer drawing power. When the HALO POWERGLOW
is manually unplugged from your device it will automatically
turn off after 25 seconds.
MOTION SENSOR LIGHT OPERATION
The HALO POWERGLOW will light up when motion is detected
within 5 inches. Simply reaching past the HALO POWERGLOW
or hovering above the HALO POWERGLOW will activate the
light. To preserve battery, the HALO POWERGLOW light will
automatically turn off after 25 seconds.
MAINTENANCE AND CARE
After prolonged use, the internal battery will become weak
and the operation may become intermittent. When the battery
is very low, the first battery indicator will flash to alert you to
recharge the internal battery as soon as possible.
To maximize battery life: once the battery is fully discharged,
immediately recharge (regardless of whether you plan to use
this unit or not). If you do not plan to use the battery for an
extended period of time (one week or longer), we recommend
that you fully charge the battery. For longer periods of storage,
please recharge the battery at least every two months to
maintain the battery in optimum condition.
SAFETY PRECAUTIONS
This HALO POWERGLOW has been designed and manufac-
tured to ensure your personal safety when used in the directed
manner. Improper use can result in potential hazard.
Please read all safety and operating instructions carefully
before installation and use. Keep these instructions handy for
future reference.
- The HALO POWERGLOW should not be used near water or
wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
- To reduce the risk of fire or electric shock, do not expose the
HALO POWERGLOW to rain or moisture. Keep the HALO
POWERGLOW away from dripping, splashing, or any objects
filled with liquids. Do not place anything on HALO POWER-
GLOW.
- Keep away from heat sources, including but not limited to:
open flame sources, radiators, stoves, ovens, cars, and
amplifiers that produce heat.
- Do not expose HALO POWERGLOW or batteries to fire or
sunshine.
- Do not puncture, crush or subject to mechanical shock.
- Do not disassemble.
- Unplug the charger when batteries are fully charged or not in
use.
- Li-ion batteries must be recycled. Do not dispose of in the
trash.
SPECIFICATIONS
Model: HPG-3000
Battery Capacity: 3000mAh
Micro USB Input: 5V 1A
USB Output: 5V 1A
Dimensions (W x H x D): 3.25 inches x 3.25 inches x .75 inches
Weight: 102 grams
Charging Time: 1 hour 40 minutes
Working Temperature: 0ºF to 45ºF
COMPLIANCE WITH FCC REGULATIONS
“This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause
harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.”
“Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.”
“NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. Consult the
dealer or an experienced radio/TV technician for help.
LIMITED WARRANTY
Halo International SEZC LTD warrants its products to be free
from defects in material and workmanship under normal use.
Conditions are as follows:
- During the first 90 days from date of purchase, Halo
International SEZC LTD will repair or replace the defective
product.
- Halo International SEZC LTD will, subject to inspection, repair
the defective product or replace it with a new or recondi-
tioned unit. The return must be accompanied by a Return
Merchandise Authorization (RMA) number to be issued upon
request, and must be shipped prepaid. We do not offer
shipping rebates at this time.
- Warranty is void if the product has been improperly handled
or misused in any way, or if the label and/or bar-coded
warranty label has been removed or tampered with.
- Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
- The warranty does not extend to the electronic equipment
that is used or which incorporates with any of our products
and accessories.
Halo International SEZC LTD shall not be held responsible for
the improper use of its products.
- For all questions or exchange requests, please call
888-907-6274, or email us at support@BestHALO.com
HALO POWERGLOW
Thank you for choosing HALO. The HALO POWERGLOW is a
portable charger with sophisticated motion sensor that lights
up using illuminating white LED ring system. This is a perfect
flashlight guide for inside any bag or backpack. The HALO
POWERGLOW charges any USB compatible small electronic
devices. Comes with strap and clip for easy attachment.
Please read the operating instructions carefully before using
the HALO POWERGLOW.
One solid light
Two solid lights
Three solid lights
Four solid lights
3%-25%
26%-50%
51%-75%
76%-100%
First light blinking
0%-25%
26%-50%
51%-75%
76%-99%
100% fully charged
Indicator Lights
How to Read
Amount of Charge
Indicator Lights
How to Read
Amount of Charge
One light blinking
0%-3%
HALO POWERGLOW POWER LEVEL INDICATORS
HALO POWERGLOW POWER LEVEL INDICATORS:
WHILE CHARGING
First light solid,
second light blinking
First two lights solid,
third light blinking
First three lights solid,
fourth blinking
All four lights solid
INCLUDED ITEMS
- HALO POWERGLOW
- Micro-USB Cable
- Operating Instructions
LOCATION OF CONTROLS
1
| Leather Strap/Carabiner
2
| Motion Sensor Light
3
| LED Battery Indicator Lights
4
| Power ON Button
5
| Micro-USB input port
6
| USB Output Port
