1. On/Off
2. Input port: 5V500mAh-1000mA
3. Output port: 5V/500mAh-1000mA
4. Power level indicator
5. Flashlight
Included Items
- 1
HALO Pocket Power 2600
- 1 split cable (standard USB split into micro USB and
30-pin)
- Operating Instructions/Warranty
Getting Started
Charge your
HALO Pocket Power 2600
using the
supplied USB cable. Initially, charge for a full eight
hours before regular use. After the initial charge,
normal charging will take five hours.
To Turn On/Off the HALO Pocket Power 2600
The HALO charger will automatically turn on and begin
charging as soon as it is plugged into your personal
electronic device. To preserve the battery, the HALO
charger will automatically turn off if the electronic
device is fully charged and no longer drawing power.
The unit may also be turned on/off by manually
pressing the power button.
Charging Your Personal Electronic Device
Charge your personal electronic device using the
supplied USB charging cable. Plug the USB connector
into your HALO charger. Insert the appropriate tip into
your personal electronic device and charging will begin
automatically. You may also use your own USB cable
that was supplied with your personal electronic device.
Power Level Indicators
Illuminates red: while the HALO charger is charging
Illuminates green: when the HALO charger is fully
charged
Illuminates blue: when your personal electronic device
is charging and plugged into the HALO charger
To Turn On/Off the Flashlight
Press the power button to turn on the flashlight. To
turn the flashlight off, press the power button again.
