Storing/Handling/Cleaning the HALO Pocket Power 2600
- Do not get wet or store in extreme temperature
conditions.
- Do not disassemble the HALO charger or attempt to repair
it.
- Use a soft cloth with soap to clean the exterior of your
HALO charger. Do not use liquid detergent or chemicals of
any kind.
Safety Precautions
- This HALO charger has been designed and manufactured
to ensure personal safety. Please read the following carefully
before using. Incorrect operation or incompatibility with
your personal electronic device may result in reduced
battery performance or damage.
- Carefully read the operating instructions, and use the
HALO charger correctly.
- Caution: The lithium-ion rechargeable battery used in this
charging device may present a risk of fire or chemical burn if
mistreated. Do not disassemble, expose to heat above 212°F
(100°C) or incinerate.
- Misusing or incorrectly connecting the HALO charger may
cause electric shock to users and damage equipment. The
HALO charger may become warm under extended high
power operation. During operation, keep the HALO charger
away from materials that may be affected by these
temperatures.
- When used correctly, lithium-ion rechargeable batteries
provide a safe and dependable source of portable power.
However, if they are misused or abused, this may result in
leakage, burns, fire or explosion, causing personal injury or
damage to other devices.
- Do not disassemble the HALO charger. There are no
user-serviceable parts inside. Incorrect reassembly may
result in shock or fire hazard.
- Do not drop or subject to strong impacts. Do not operate
the HALO charger if it has received a sharp blow, or
otherwise been damaged in any way.
- Do not expose the HALO charger to moisture, water, rain,
or snow.
- Do not insert any object into the ports or openings of the
HALO charger.
- Never charge the HALO charger unattended.
- There is a risk of the batteries exploding, overheating, or
igniting. Do not disassemble, modify, heat or short-circuit
the batteries. Do not place in fire or leave in hot places. Do
not expose to direct sunlight.
- Only charge the HALO charger by the specified method
with the specified USB cable.
- In the unlikely event of leakage or explosion use sand or a
chemical fire extinguisher.
- Batteries should be recycled or disposed of as per state
and local guidelines.
Specifications
Battery Cell: Cylindrical Lithium-ion
Power Capacity: 2600mAh
Rated Input: 5V/500mAh-1000mA
Rated output: 5V500mAh-1000mA
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received,
including interference that may cause undesired operation.
15.21
You are cautioned that changes or modifications not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with
the limits for Class B digital devices, pursuant to Part 15 of
the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
Limited Warranty
HALO2CLOUD, LLC warrants its products to be free from
defects in material and workmanship under normal use.
Conditions are as follows:
- During the first one year from date of purchase,
HALO2CLOUD, LLC will repair or replace the defective
product.
- HALO2CLOUD, LLC will, subject to inspection, repair the
defective product or replace it with a new or reconditioned
unit. The return must be accompanied by a Return Materials
Authorization (RMA) number to be issued upon request,
and must be shipped prepaid. A shipping rebate will only
be extended to the customer in the event that a defect in
material or workmanship is confirmed.
- Warranty is void if the product has been improperly
handled or misused in any way, or if the label and/or
bar-coded warranty label has been removed or tampered
with.
- Warranty returns require a check for $14.95 for processing
and handling made payable to HALO2CLOUD, LLC.
- Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase and be sent to
HALO2CLOUD, LLC (www.halo2cloud.com).
- The warranty does not extend to the electronic equipment
that is used or which incorporates with any of our products
and accessories. HALO2CLOUD, LLC shall not be held
responsible for the improper use of its products.
To contact us, email us at
support@halo2cloud.com
or call 888-907-6274
The HALO cloud logo
HALO2CLOUD, LLC
and
HALO Pocket Power
2600
148 Eastern Boulevard, Suite 210
are registered trademarks of
Glastonbury, CT 06033
HALO2CLOUD, LLC
www.halo2cloud.com
