STARTING A NEUROPRIMING SESSION
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Connecting to Halo Sport
To connect to your Halo Sport, make sure it is turned on. If you have already connected to Halo Sport with your
Bluetooth device, the light should slowly blink, once briefly every three seconds. If this is the first time connecting to
Halo Sport with your Bluetooth device, the light should be rapidly blinking green, once every second.
1. Open the Halo Sport App.
2. Your Halo Sport will appear in the list as ‘Halo Sport XXXXX’ where ‘XXXXX’ are the last 5 digits of your
headset’s serial number. If multiple Halo Sport units are within range you can tap the headset power button
to highlight your headset in the list.
3. Make sure the headset you are trying to pair to says ‘Available to pair’. If is does not, see ‘Disconnecting a
Bluetooth Device’ on Page
17
.
4. Select your headset and wait for the pairing request.
5. When you are prompted to pair, select ‘Pair’.
Note: you need to pair Halo Sport in the Halo Sport App, not in your smartphone’s Bluetooth Settings. Halo Sport
can only be paired to one Bluetooth device at a time. If the Halo Sport App says ‘Paired to device’ that means it is
connected to a different Bluetooth device than the one you are trying to use.
Choosing a Neuropriming session
1. Go to the ‘Select Session’ screen on the Halo Sport App.
2. On the bottom of the App there is an ‘^’ icon.
3. Select the icon and you will see the available Neuropriming sessions.
4. Select your desired session.
7
Halo Neuroscience | 735 Market St, 4th floor, San Francisco, CA 94103 | support@haloneuro.com
