Page 5
1000001732 (Rev. D - 06/16)
HAC-HB*1B HAC-HB-NF-*1B
3) Mount Filter Head Assembly
Mount Filter Head Assembly into Cooler.
Unit with single supplied screw:
4) Connect Building water supply.
• Remove the 3/8” water inlet from the in-line
strainer.
•
Connect 3/8” poly tubing between the inlet of the
filter and the water inlet using the supplied
3/8” -3/8” union connector.
•
Discard in-line strainer.
Single Level Models
Two Level Models
• Single Level Models
• Mount on inside of left panel butted up against
top lip.
• NOTE: The filter bracket is mounted with a
single screw.
• Two Level Models
• Mount in left hand cooler on the inside of the
right panel, butted up against the top lip.
• NOTE: The filter bracket is mounted with a
single screw.
HWF3000 WATERSENTRY PLUS FILTER INSTALLATION
Fig. 1
Buy at
| 855-558-9600 | BottleFillingStations.com
