14
15
At Haltech we make every effort to design and
manufacture fault-free products that perform up to
or above the market expectations. All our products
are covered by a Limited 12 Month Warranty.
Haltech Limited Warranty
Unless specified otherwise, Haltech warrants its products
to be free from defects in material or workmanship for a
period of 12 months from the date of purchase.
If the Haltech product is found to be defective as men
-
tioned above, it will be replaced or repaired if returned
prepaid along with proof of purchase. Proof of purchase
in the form of a copy of the original purchase invoice,
receipt or bill of sale which indicates that the product is
within the warranty period, must be presented to obtain
warranty service.
Replacement or repair of a defective product shall con
-
stitute the sole liability of Haltech. To the extent permitted
by law, the foregoing is exclusive and in lieu of all other
warranties or representations, either expressed or im
-
plied, including any implied warranty of merchantability
or fitness. In no event shall Haltech, be liable for special
or consequential damages.
Product Returns
Please include a copy of the original purchase invoice,
receipt or bill of sale along with the unused, undamaged
product and its original packaging. Any product returned
with missing accessory items or packaging will incur ex
-
tra charges to return the item to a re-saleable condition.
All product returns must be sent via a freight method
with adequate tracking, insurance and proof of delivery
services. Haltech will not be held responsible for product
returns lost during transit.
Returns of Products Supplied in Sealed
Packaging
The sale of any sensor or accessory supplied in sealed
packaging is strictly non-refundable if the sealed pack
-
aging has been opened or tampered with. This will be
clearly noted on the product packaging. If you do not ac
-
cept these terms please return the sensor in its original
unopened packaging within 30 days for a full refund.
A sensor or accessory product may be returned after 30
days of purchase (with its sealed packaging intact) for
credit only (no refunds given) and will be subject to a 10%
restocking fee.
Installation of Haltech Products
No responsibility whatsoever is accepted by Haltech for
the fitment of Haltech Products. The onus is clearly on
the installer to ensure that both their knowledge and the
parts selected are correct for that particular application.
Any damage to parts or consequential damage or costs
resulting from the incorrect installation of Haltech prod
-
ucts are totally the responsibility of the installer.
Always disconnect the battery when doing electrical
work on your vehicle. Avoid sparks, open flames or use
of electrical devices near flammable substances. Do not
run the engine with a battery charger connected as this
could damage the ECU and other electrical equipment.
Do not overcharge the battery or reverse the polarity of
the battery or any charging unit. Disconnect the Haltech
ECU from the electrical system whenever doing any
welding on the vehicle by unplugging the wiring harness
connector from the ECU.
After completing the ECU installation, make sure there is
no wiring left un-insulated. Uninsulated wiring can cause
sparks, short circuits and in some cases fire. Before at
-
tempting to run the engine ensure there are no leaks in
the fuel system.
All fuel system components and wiring should be mount
-
ed away from heat sources, shielded if necessary and
well ventilated. Always ensure that you follow work
-
shop safety procedures. If you’re working underneath a
jacked-up car, always use safety stands!
_____________________________________________
Haltech Off-Road Usage Policy
In many states it is unlawful to tamper with your vehicle’s
emissions equipment. Haltech products are designed
and sold for sanctioned off-road/competition non-emis
-
sions controlled vehicles only and may never be used on
a public road or highway.
Using Haltech products for street/road use on public
roads or highways is prohibited by law unless a specif
-
ic regulatory exemption exists (more information can be
found on the SEMA Action Network website www.sema
-
san.com/emissions for state by state details in the USA).
It is the responsibility of the installer and/or user of this
product to ensure compliance with all applicable local
and federal laws and regulations. Please check with your
local vehicle authority before purchasing, using or install
-
ing any Haltech product.
WARRANTY CERTIFICATE
WIRING NOTES
CONNECTOR A
Pin Function Colour
Notes
A1
INJ 1
Blue
_______________
A2
INJ 2
Blue/Black
_______________
A3
INJ 3
Blue/Brown
_______________
A4
INJ 4
Blue/Red
_______________
A5
INJ 5
Blue/Orange
_______________
A6
INJ 6
Blue/Yellow
_______________
A7
INJ 7
Blue/Green
_______________
A8
INJ 8
Blue/Violet
_______________
A9
DPO 1
Violet/Black
_______________
A10 PGND OUT Black
_______________
A11 PGND OUT Black
_______________
A12 DPO 2
Violet/Brown _______________
A13 IGN SW IN Pink
_______________
A14 DPO 3
Violet/Red
_______________
A15 DPO 4
Violet/Orange _______________
A16 DPO 5
Violet/Yellow _______________
A17 DPO 6
Violet/Green
_______________
A18 HBO5 (12V) Pink/Red
_______________
A19 HBO 1
Brown/Black
_______________
A20 HBO 2
Brown/Red
_______________
A21 HBO 3
Brown/Green _______________
A22 HBO 4
Brown/Pink
_______________
A23 CAN1H
White
_______________
A24 CAN1L
Blue
_______________
A25 HBO6(12V) Pink/Brown
_______________
A26 +12V LOW Red/Blue
_______________
A27 IGN 1
Yellow/Black
_______________
A28 IGN 2
Yellow/Red
_______________
A29 IGN 3
Yellow/Orange _______________
A30 IGN 4
Yellow/Green _______________
A31 IGN 5
Yellow/Brown _______________
A32 IGN 6
Yellow/Blue
_______________
A33 IGN 7
Yellow/Violet _______________
A34 IGN 8
Yellow/Gray
_______________
Notes:
CONNECTOR C
Pin Function
Colour
Notes
C1
TRIG+
Yellow
______________
C2
TRIG -
Green
______________
C3
HOME +
Yellow
______________
C4
HOME -
Green
______________
C5
SPI 1
Gray/Brown
______________
C6
SPI 2
Gray/Red
______________
C7
SPI 3
Gray/Orange ______________
C8
SPI 4
Gray/Yellow
______________
C9
+8V
Orange/White ______________
C10 AVI 1
White
______________
C11 AVI 2
White/Yellow ______________
C12 AVI 3
White/Gray
______________
C13 AVI 4
White/Violet
______________
C14 AVI 5
White/Green ______________
C15 AVI 6
White/Orange ______________
C16 AVI 7
White/Black
______________
C17 AVI 8
White/Brown ______________
C18 AVI 9
White/Red
______________
C19 SPI 5
Gray/Pink
______________
C20 SPI 6
Gray/L.Green ______________
C21 CAN2H
White
______________
C22 CAN2L
Blue
______________
C23 Knock 1
Black/Blue
______________
C24 Knock 2
Black/Green
______________
C25 +5V
Orange
______________
C26 SGND A
Black/White
______________
C27 AVI 10
L.Green
______________
C28 AVI 11
L.Green/Black ______________
C29 WB Gray
______________
C30 WB Input
Yellow
______________
C31 WB Pump
Red
______________
C32 WB Nernst
Black
______________
C33 WB Heater- White
______________
C34 WB Cal
Green
______________
Notes:
CONNECTOR E
Pin Function
Colour
Notes
E1
INJ 12V
Red/Blue
______________
E2
IGN 12V
Red/Yellow ______________
E3
25A-HCO 3
Red/Orange ______________
E4
25A-HCO 4
Red/Green
______________
Notes:
