29
MM1 Series Hood Installation, Operation & Maintenance Manual
OM032/0920
18/re
v6/EN
MM1 FIELD COMMISSIONING INSTRUCTIONS
Operation Notes
1. The Hood Control Panel is configured in such a manner that exhaust fan and makeup air unit
will be on when any combination of ovens are powered.
2. In the event of a fire, the make up air fan start/stop signal will switch to off and exhaust fan
will go to full speed.
3. When the manual override is activated, the exhaust fan will operate at full speed.
Commissioning
1. Ensure that the oven wiring harness is installed, all field connections are made and power is
applied to the control panel, exhaust fan and oven.
2. Locate the status indicator lights on the control panel face, see photo below.
3. Turn on the top oven deck and verify that the Exhaust Fan, the Make Up Air and the Top Deck
(Oven 1 Status) lights are illuminated. See the status designations in photo below.
Control Panel Face
