WARRANTY
Halton Company warrants all MM1 hoods for a period of 12 months from date of shipment to be
without defects in workmanship and material. Omissions or defects will be re- placed or repaired at
Halton’s option. Halton will not accept labor charges without prior approval.
GENERAL INSTALLATION
Upon receipt of the Halton hood, inspect it immediately for any shipping damage and notify carrier
immediately if damage is found. Halton will not accept responsibility for any shipping damage, but
will assist with getting a claim filed if needed.
There are no instructions contained within this manual for installation or maintenance of fan pack-
ages. See appropriate manufacturer’s manual for detailed instructions.
It is the responsibility of the installing contractor to see that the system installation is completed in
accordance with the project plans and specifications and that it meets all specific requirements of lo-
cal code officials. The local authority having jurisdiction could overrule some of the installation details
written in this manual. The installation shall be in accordance with NFPA-96. All electrical systems
shall be installed following local and national codes.
It is very important that the system be turned over to the owner in the best condition pos- sible. The
owner and/or operator should be instructed in the proper operation, care and maintenance of the
system.
If questions or complications should arise during the installation of the Halton hood that cannot be
solved using the instructions, please contact EVS at 586-779-0996. For Warranty questions or issues
please contact the Halton office at 1-800-442- 5866.
Continuous product improvement is a Halton policy, therefore specifications and design are subject
to change without notice.
For Warranty issues:
101 Industrial Drive
Scottsville, KY 42164
800-442-5866 (800-4-HALTON)
www.halton.com
For Installation and Control Wiring questions:
call EVS at 586-779-0996
.
