WI-25023
17
PAIN MANAGEMENT SYSTEMS
Generator Service Manual
8 Maintenance and Servicing
No servicing is permitted at the operator level. The generator must be returned to the
manufacturer for all servicing and repairs. Please note that the cover of the generator should
not be removed for any reason. Also, please be aware that no preventative maintenance or
calibration is required on the PMG. Refer to the PMG User Manual for Warranty Information.
Refer servicing to a qualified
Halyard Health Technician
Email: piq@hyh.com
U.S. Customers: 844-HALYARD (425-9273)
International Customers: 844-HALYARD (425-9273)
Note:
Please request shipping address for return of Generator for servicing if not provided inside
of your Loaner PMG Packaging. Upon reporting of a complaint, the PMG shall be returned for
repairs as determined by your HYH representative. Additional information on the return process
can be provided by contacting Halyard Health at the phone number above.
9 Generator Voltage Setting
9.1 Make sure the rear panel of the PMG is facing the user (see Fig 5.2).
9.2 Check power configurations. Both fuse drawer and voltage selector switch are set
to facility outlet voltage (either 110V or 220V).
9.3 For a correct 110V setting, the appropriate 110-120V should be pointing downwards
and the 220-240V is upside down (Fig 9-1) with an upward pointed arrow.
9.4 For a correct 220V setting, the appropriate 220-240V should be pointing
downwards and the 110-120V is upside down with an upward pointed arrow.
9.5 The correct setting for the Voltage Selector shows at the top (vertically) of the
switch. See Figure 9-2 for the correct 110V setting.
9.6 Contact HYH Technical Support (844-425-9273) for support.
Note: There are no serviceable parts for the Pain Management Generator.
Fig 9-1
(Fuse Drawer)
Fig 9-2
(Voltage Selector)
