Installing a SIM card
You need a SIM card to receive automatic e-mail and/or FTP reports from your microSpider2.
Halytech can provide fully functioning SIM cards for you.
If you want to source your own SIM card, contact your preferred mobile phone carrier and ensure that the
SIM card is provisioned with a plan enabling internet access.
microSpider2 units are fitted with two different type of SIM card holders. They are easily distinguishable by
the colour of their cover - either black of silver. Please follow the instructions relevant to the type of SIM card
holder installed in your unit.
IMPORTANT:
Before installing a SIM card into a microSpider2, put it in a standard mobile phone and disable
its PIN, if it has one.
To install a SIM card into a microSpider2 fitted with a
BLACK
SIM card holder:
1.
Open up the microSpider2
as described in “Opening the microSpider2 Industrial”.
2.
Insert the SIM card:
a.
Slide the SIM card cover holder to the “OPEN” position
b.
Lever it upwards on its hinge to open it.
c.
Slide the SIM card into the groove of the cover, observing the proper notch orientation.
d.
Close the cover and slide the cover into the “LOCK” position.
a.
b.
c.
d.
To install a SIM card into the microSpider2 fitted with a
SILVER
SIM card holder:
1.
Open up the microSpider2
as described in “Opening the microSpider2 Industrial”.
2.
Insert the SIM card:
a.
Slide the SIM card cover holder to the “OPEN” position
b.
Lever it upwards on its hinge to open it.
c.
Lay the SIM card flat onto the base of the SIM socket, observing the proper notch
orientation.
d.
Close the cover
e.
Slide the cover into the “LOCK” position.
a.
b.
c.
d.
e.
