10
Note:
If the message shown above is not
displayed, the Hama WLAN USB Stick was
not correctly identifi ed by your PowerMac.
Ensure that the stick is correctly con-
nected to a USB 2.0 port and that the USB
2.0 interface card was correctly installed
in your system.
After the Hama WLAN USB Stick has been
properly detected, the following window
opens.
Select the
New environment
… option
under Environment.
Name the new environment e.g. WLAN
and click the
OK
button.
Select the
Environment
menu item again
in the Network window and select the
New environment which has also been
selected,
WLAN
in our case. Next, select
the
Show/Display
menu item in the
Network window and select the
Network
confi gurations
option.
Note:
The process for selecting the con-
nections can vary depending on the MAC
model and features.
In our case, remove the tick for all con-
nections except the Ethernet connection
(en2).
Then click the
Activate
button.
The confi guration process is now comple-
te for your system.
Summary of Contents for 00039749
Page 2: ...N O T E B O O K 00039749 WLAN USB Stick 54 Mbps...
Page 14: ...13...
