background image

Connecting the Wireless LAN Router

• The unit may not be operated in the vicinity of heaters or in dusty or moist areas.
• Unplug the unit from the power supply before connection.
• Connect the computers, other network devices, hubs/switches to sockets 1-4. Use a crossover or 

CAT5 patch cable (max. 100m). The integrated switch automatically identifies the connection 
speed of 10 or 100Mbps, half/full duplex transfer mode and the type of cable used.

• Connect the Ethernet port of your modem to the WAN connection on the router. A 1:1 or cross-

over cable is required depending on the modem. In most cases, the existing connection cable can 
be used.

• Plug the power unit supplied into an empty socket and connect it to the router. 

Caution:

An unsuitable 

power unit can cause damage!

Checking the installation

There are 10 LEDS on the front to display the status:

LED

Zustand

Status

PWR

Lit

Power unit is connected and supplying electricity

Off

No power unit connected, device not being supplied with electricity

WLAN

Flashing

The WLAN port has generated a correct network connection

Off

No WLAN device within range or not working

WAN

Lit

The WAN port has generated a correct network connection

Flashing

Data transfer via WAN port

Off

No connection

LAN1-4

Lit

The corresponding LAN port has generated a correct network connection

Flashing

Data transfer via respective LAN port

Off

No connection

Software configuration

TCP/IP protocol must be installed on all PCs which are to use the internet. By default, the IP address

192.168.1.254

is configured for the router. Connect the router to a computer of your choice. The IP must first

be assigned manually on this computer. See the manual or online help of your operating system for instruc-
tions on how to do this. It is essential that you assign the IP address 

192.168.1.1

and the subnet mask

255.255.255.0

! You can then configure the router using the web browser. The browser must be Java-capable

and the Java function must be activated (e.g. Internet Explorer 5.0 or better, or 
Netscape Navigator from version 4.71).

L

Instructions Wireless LAN Router 54 Mbps

All manuals and user guides at all-guides.com

all-guides.com

Summary of Contents for 00049045













Reviews: