In order to remove the drive casing, right-click the small green arrow symbol in the System tray (at the bot-
tom right of the screen beside the Windows® clock) and then ? Stop USB Mass Storage Device. Click -> OK
-> and you can then disconnect the casing safely.
Windows® ME/2000/XP/XP 64 Bit Edition:
No additional driver files are required. The drive casing is recognised and installed automatically.
In order to remove the drive casing, click the small green arrow symbol in the System tray (at the bottom
right of the screen beside the Windows® clock) and then -> Remove or eject hardware or -> Remove hard-
ware safely. Then click -> Deactivate or -> Exit -> OK. A message appears stating that you can remove the
hardware safely -> OK or -> Exit. You can disconnect the casing.
Safety Instructions:
•
Do not operate the device in damp or dusty environments
•
Do not operate this device on radiators or near heat sources.
•
This device is designed for indoor use only.
•
This device is not designed for use outdoors.
•
Protect the device from pressure and impact during operation.
•
Do not open or move the device during operation.
00062703bda 30.08.2005 15:34 Uhr Seite 7
