1
1
1
13
11
1
3
3
3
5
5
5
6
6
6
10
7
7
9
8
7
12
4
4
4
2
2
2
7
8
2
9
14
10
6
3
5
4
11
12
13
A
B
UK/DE
JP
US
ALARM
2
3
G
Operating instruction
Controls and Displays
A Controls
1. Display
2.
button = sets the time
3.
button = displays alarm time (approx. 5 seconds); used for setting alarm
4.
ALARM ON/OFF
slide switch = activates/deactivates the alarm
5.
button = reduces the current set value
6.
button = increases the current set value
7.
SNOOZE/LIGHT
button = activates the backlight (approx. 5 seconds)/postpones
the alarm for 5 minutes
8. Twilight sensor
9.
ON/OFF
slide switch = activates/deactivates the twilight sensor
10.
WAVE
button = activates/deactivates manual radio signal reception; switches
between °C and °F (UK/DE/US); switches between 40 kHz and 60 kHz frequencies
(JP)
11.
RESET
button = restores factory settings
12.
OFF/US/UK/DE/JP
slide switch = activates/deactivates the radio signal; activates
summer time and deactivates radio signal
13. Battery compartment
14. Cover flap
B Display icons
1. Time
2. AM/PM (12-hour format)
3. Day
4. Month
5. Day of the week
6. Temperature
7. Signal strength
8. Summer time
9. Time zone map (US)
10. Alarm time
11. AM/PM (12-hour format)
12. Alarm clock icon
13. Alarm clock display icon
Thank you for choosing a Hama product.
Take your time and read the following instructions and information completely. Please
keep these instructions in a safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your attention to
specific hazards and risks.
Note
This symbol is used to indicate additional information or important notes.
2. Package Contents
• RC 150 global travel alarm clock
• 2 AAA batteries
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating, and only use it in a dry
environment.
• Do not use the product in areas where the use of electronic devices is not permitted.
• Only connect the product to a socket that has been approved for the device. The
socket must be installed close to the product and easily accessible.
• Do not drop the product and do not expose it to any major shocks.
• Do not attempt to service or repair the product yourself. Leave any and all service
work to qualified experts.
• Do not modify the product in any way. Doing so voids the warranty.
• Remove the batteries from the product if you will not be using it for an extended
period, unless it is being kept ready for emergencies.
WAVE
