4
5. Operation
Note – Settings
• When an item flashes, that item is selected and can be set.
• Hold down the
UP
button (6) or the
DOWN
button (5) to select the
values faster.
5.1 Setting the date/time/time format
• After the batteries’ contact breaker is removed, the normal time is displayed
in 12-hour format and a melody signals that the product is ready for use.
(Normal time mode)
• Press the
MODE
button (2) to switch between the 12 and 24-hour formats.
In the 12-hour format, PM is displayed before the time from noon to one
minute before midnight.
• Use the
UP
button (6) or
DOWN
button (5) to select the desired format.
• Then press the
SET
button (4) to make the following settings in order:
• Hours
• Minutes
• Year
• Month
• Day
• To select individual values, press the
UP
button (6) or the
DOWN
button (5)
and confirm each selection by pressing the
SET
button (4).
• Press the
SET
button (4) to adopt the set value displayed and to skip.
Note
• In the course of setting the date, the day of the week – Monday (MON) to
Sunday (SUN) – is set automatically.
• If you do not make an entry for 60 seconds, the settings will automatically
close.
5.2. Setting and using the alarm function
• In normal mode, press the
MODE
button (2) twice or the
ALARM
button
(3) once to set the alarm function. The display shows
ALARM
.
• Then press the
SET
button (4) to make the following settings in order:
• Hours
• Minutes
• Alarm melody
• To select individual values, press the
UP
button (6) or the
DOWN
button (5)
and confirm each selection by pressing the
SET
button (4).
• Press the
SET
button (4) to adopt the set value displayed and to skip.
• Press the
MODE
button (2) repeatedly to switch between the various modes.
• The alarm function is activated and
ALARM
is displayed in normal mode.
• If the alarm is triggered, the selected alarm melody sounds.
Summary of Contents for 186357
Page 2: ......
Page 3: ...6 1 2 3 4 5 ...
