L
SATA Card Bus Double PC Card
Installation on Windows XP:
After inserting the card, the new hardware
wizard
will appear. Select the option
"Install
software from a list or particular source (for
advanced users)“.
Next†
insert enclosed
driver CD. Should a window appear with the que-
stion
"Which action do you want Windows to
perform?"
, choose the option
"Do not carry out
any action"
and click on
Ok
Now select
"Browse following source:"
and enter
”D:\"
(whe-
reby
D:
represents the initial of your disc drive
and must be changed if necessary).
Next
if
the window
"Software for following appliance
not found“
appears, click
Back
and check
you have entered the details correctly. Should
you now receive the message
"The software
which has been installed for this hardware, has
not passed the Windows logo test which checks
compatibility with Windows XP."
click on
"Con-
tinue installation“.
The necessary files are now
copied from the CD fi Finish
Important instructions for Windows XP:
You can check whether controller has been
installed successfully by selecting
Start
Con-
trol Panel
System
Hardware
Device
Manager
(in some systems, you must click
Switch to Classic View
to see the System icon).
The following should appear without yellow
exclamation marks:
SCSI and RAID controller
• Silicon Image Sil3112 SATALink controller
Installation on Windows 2000:
After inserting the card,
the new hardware
wizard
will appear.
Continue
Choose the
option "Search for a suitable driver for this devi-
ce (recommended)“ and insert enclosed
CD
.
Continue
Now select
"Specify another locati-
on".
Enter the location
"D:\”
into the next dia-
logue box, whereby
D:
indicates the initial of your
CD drive and must be replaced if necessary.
OK
Continue
If a window saying
"Software
for device not found"
appears, click
Back
and check you have entered the details correctly.
Should you now receive a message saying Win-
dows cannot locate a digital signature, click
Yes
the necessary files are now copied from
the CD. Click
Ready.
Important instructions for Windows 2000:
You can check whether the controller has been
installed successfully by selecting
Start
Settings
Control Panel
System
Hard-
ware
Device Manager.
The following should
appear - without yellow exclamation marks:
SCSI and RAID controller
• Silicon Image Sil3112 SATALink Controller
Installation on Windows 98SE/ME/2000:
After you have inserted the card, the message
"New Hardware Found"
appears. The controller
is identified as a
”PCI mass storage controller”
The hardware assistant then opens and sear-
ches for new drivers for the controller. Place
enclosed driver CD into CD drive. After the mes-
sage
“What do you want Windows to do?“
, sel-
ect
"Specify location of driver (advanced)"
and then click
Continue
. Select
"Specify a
location"
and enter
"D:\”
, whereby
D:
indicates
the initial of your CD drive and must be changed
if necessary.
OK
Continue
If a window
saying
"Software for device not found"
appears,
click
Back
and check you have entered
details correctly.
Continue
. the necessary
files are now copied from the CD
Ready.
Important instructions for Windows 98SE:/ME
You can check whether the controller has been
installed successfully by selecting
Start
Settings
Control Panel
System
Devi-
ce Manager
. The following should appear - with-
out yellow exclamation marks:
SCSI controller
• Silicon Image Sil3112 SATALink controller
Please Note:
If you wish to use this product with an operating
system that is not listed above, first check
whether additional information is available under
service at
www.hama.de
and whether drivers for
this product exist.
