2
G
Operating instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Keep these operating
instructions in a safe place for future reference.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety
instructions or to draw your attention to specific
hazards and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Extent of Delivery
• USB 2.0 Card Reader
• USB 2.0 Cable
• These operating instructions
3. Safety Instructions
• The product is intended for private, non-commercial
use only.
• Protect the product from dirt, moisture and
overheating and use it in dry rooms only.
• Do not use the product in the immediate vicinity of
heaters or other heat sources or in direct sunlight.
• Do not drop the product and do not expose it to any
major shocks.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to qualified
experts.
• Do not open the device or continue to operate it if it
becomes damaged.
• Dispose of packaging material immediately according
to locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
• Keep this product, as all electrical products, out of
the reach of children!
4. System Requirements
The Card Reader supports the following operating
systems:
• Windows 10/8/7/Vista/XP
Mac OS 10.x
Note
If you want to use the Card reader with another
operating system than those listed above, please
check first if you can find more information or
drivers in the service area at www.hama.com.
5. Product Features
The product supports the following memory cards:
• SD / SDHC / SDXC
• microSD / microSDHC / microSDXC
• MMC / MMC Plus / MMC 4.0
• MS / MS Pro / MS Pro-HG Duo
• CompactFlash I / CompactFlash II
• xD-Picture Card
• M2 = Memory Stick Micro
6. Getting started and operating
Note – Compatibility USB 1.1
• The USB 2.0 Card Reader is backwards
compatible to USB 1.1.
• No additional drivers are needed. The
installation runs automatically.
• Connect the included USB 2.0 cable to the multi
Card Reader.
• Connect the free connector of the USB cable to an
available USB port on your computer.
• Plug your memory card into the appropriate slot of
the multi Card Reader. A flashing LED indicates a
successful connection. You can now run the data
transfer between your computer and the memory
card.
• The LED indicator light flashes during data transfer.
• It is also possible to transfer data between two
memory cards which are plugged simultaneously into
the same Card Reader.
